reasonable price for the schematic - the service is perfect, all as expected and pointed by instructions - good scan of the original plans - thank you!
Manual was just as described!!! I odered it and in less than a day was able to download it and the text was clear and pages were all complete just as the original manual was. Purcashed this for a friend and they were more than happy. Perfect all around!
The manual I purchased was exactly what I needed to repair my Toshica television. The manual contained schematics and troubleshooting information that was very helpful.
The tilt of the projector can be adjusted using the foot adjuster. Adjust this when the highest position by the lens shift dial 20 is insufficient. Refer to �Projection on the screen� 28 , and adjust the foot adjuster after projecting a picture.
1
Foot adjuster Foot adjuster release button
Lift the front of the projector until the desired tilt angle is obtained and hold down the foot adjuster release button.
The foot adjuster will extend. Release the button to lock in position.
Installation and connections
2
Lift up Lower
Turn the foot adjuster to make fine adjustment to the height.
Turn clockwise to lift up. Turn counterclockwise to lower.
Notes
� To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly. � Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers. � Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the life duration of the lamp may be shortened.